Note: The technique to flash custom firmware in this article is not exclusively limited for Nokia 5800XM only. In fact, most Nokia phone can be flashed up with custom firmware using the method that I will discuss below. However, due to my limited experience with other Nokia model, it is safe to set the title as above.
Introduction
I bought my Nokia 5800XM in January 2010 for RM1100. This price includes all genuine accessories, 18 month warranty, additional leather cover and genuine Garmin GPS software. Several months later, I bought Sennheiser CX 300-II Precision to be paired with 5800XM. Suffice to say, this combination complete my mobile audio experience.
Original firmware that came with my unit was version 20 something. Then, I immediately flashed it to version 30 something using Nokia PC Suite. I also upgraded Nokia Map (the one that charge per GPS route navigation) to Ovi Map (more comprehensive map and totally free of charge). Later on, I upgrade the firmware to version 40 something. In this version, Nokia introduce ‘Kinetic Scrolling’. Something like what iPhone has where we just slide our finger on the screen to move the list up or down. It was still not as smooth as iPhone but it did make me smile. A month or two later, firmware version 50 was out and I flashed this phone again. This firmware provides some performance enhancement and full ‘Kinetic Scrolling’ experience. The kinetic scrolling is much smoother and accessible at the main menu (something that was not included in firmware version 40). Finally, last two weeks, I upgrade my firmware to version 51 over the air (Celcom, my operator notified me about this upgrade and offers FOTA upgrade). However, this version doesn’t offer any additional function but some minor performance enhancement upgrade.
Direct comparison to my friend’s 5800XM who still use firmware version 20 (she never bother to upgrade her phone firmware), shows a very significant performance enhancement. Despite the kinetic scrolling, Ovi maps and several other Ovi’s services (which she doesn’t has in her unit), my phone seem to be much more responsive, better transition animation and has slightly better camera output quality. Kudos for Nokia for actively and progressively releases better firmware for the phone. (Phew, what a long words just to say, firmware does matter LOL)
The CFW’s Journey Begin
Okay, let move on to the main topic, the CFW. CFW stand for custom firmware or cooked firmware. It is a modified firmware that is based on the Nokia original firmware. CFW is loaded with many features that make the original firmware look bland. For example, CFW is significantly faster, contains many more homescreens, extremely cool transition animation, flash based homescreen, widgets and best of all it doesn’t check application’s certificate or sign application (in other word, it allows you to install any unsigned application into your phone). Some CFWs for 5800XM even are ported from N97 or Nokia X6.
However, not many have the courage to flash his/her mobile phone with custom firmware. Many believe that the trouble or risk of flashing custom firmware is not worth the effort due to the fact that you may brick your phone if you do it wrong. I was in this group prior to yesterday. The image of seeing my Nokia 5800XM as a fancy paper weight is enough to make me stay clear from install custom firmware.
However, upon further read from several tutorials and board discussions, it is not as hard as it seem initially. In fact, honestly speaking, flashing CFW into our beloved phone is easy as installing a new theme or application. But the risk is real. One or two critical mistakes during the process may brick the phone. So, do yourself a favor. Read thoroughly this article before flash your phone with CFW. Don’t rush okay J .
The Procedure
You need these tools. So download them:
- Nokia Ovi Suite
- Navifirm
- JAF tool and Pkey (Nokia Flash Tools.rar)
- Dot Net framework (at least version 2 for WinXP user)
Install Nokia Ovi Suite & Backup Your Phone
Install Nokia Ovi Suite and back up your phone especially your contacts, message etc. In fact, just backup everything because prior to flashing your phone, we need to hard reset it and format your phone memory card to avoid any potential error later on. Hard reset will erase all your contacts, message, phone setting etc. So back them up using Nokia Ovi Suite.
Even if you don’t want to back up your phone, it is essential to install Nokia Ovi Suite for the driver purpose. Otherwise, JAF tool can’t see your mobile phone at later stage.
Return Your Phone Software to Its Original State
Format your phone memory card. You can do this using your phone or using a memory card reader. I personally prefer to format my memory card using my own phone. Go to : File Manager / E: Memory Card / Click on Options button / Memory card option / Format.
Next, hard reset your phone. You may achieve this using 2 methods: The first one is type *#7370# (the default security code is 12345) but I prefer the below method (bypass security code):
- Turn the phone off
- Press and hold 3 keys (green + red + camera) together.
- Without releasing these keys, turn the phone on.
- Keep holding these 3 keys until the screen show Nokia’s standard hand shake animation.
- Release these 3 keys. Your phone will execute hard reset process.
Okay, now your phone software is good as new.
Download Your Phone Original Firmware
Now we need to download your phone’s original firmware using NAVIFIRM. Originally, we flash our phone using Ovi Suite or PC Suite right. This suite automatically detects our phone hardware and software then downloads and installs the relevant firmware for our phone automagically. However, for this one we need to manually select and download the right firmware for our phone.
Extract and run NAVIFIRM. Mine is as shown below.
Choose your phone model correctly. As we can see here, there are 3 variant of Nokia 5800XM. The RM-356, RM-427 and RM-428. Different model number use different kind of hardware. So, do not download firmware for RM-427 or RM-428 if your phone model is RM-356. You can check your phone model by typing *#0000#. Look for Type.
‘Release’s is firmware version. Ensure that the firmware you are going to flash into your phone (the one you are about to download using NAVIFIRM now) is newer (or at least has same version number) than the one that already in your phone. Downgrading firmware will definitely brick your phone. You may check with your phone firmware by typing *#0000# too. As for my case, my current phone firmware is 51.0.6. So, I have to download ‘releases’ version 51.0.6 or later (in this case, 51.0.6 is the latest one).
Next, choose your phone variant. My Nokia 5800XM is for Malaysian market and has ‘red lining’. Therefore I chose “APAC1 RED MALAYSIA (0570196)”. If you are not from Malaysia, for example Indonesia and your phone has blue lining, you may want to choose “APAC1 Indonesia BLUE (0559960)” variant.
Finally for the files section. Just tick them all. And press “Download from FiRe” button. Save the files into “Your phone model number” folder. As for my case, I save them into a folder name RM-356 on my Desktop.
Download the Custom Firmware
There are so many CFWs for Nokia 5800XM out there. To say CFW A is better than CFW B and vice versa is not entirely correct. Different CFW has different goal. Some CFW is more features and function oriented thus this firmware is kinda bloated for some perspective. Some CFW is more speed and performance oriented. So this firmware may be seem too bare for somebody else. In fact, some firmware might be tweaked to the extreme where battery life is no longer a primary concern. Therefore, it is up to you to choose the right firmware for your mobile phone. http://forum.dailymobile.se/index.php?board=84.0 is a good place to start to find the right firmware for your taste.
As for this tutorial, I use Xtension^10 CFW variant 2. You may get it at http://forum.dailymobile.se/index.php/topic,22786.0.html . I personally prefer this extension due to its performance oriented but not too minimalistic. Having 82 MB free RAMs is a very good thing too. Furthermore, Xtension^10 is based on firmware version 51.0.006. Other Xtension CFWs are based on previous version of Nokia firmware. As we can’t downgrade the phone firmware, it is really important for you to pay special attention here. Do not download CFW that is based on firmware that is older than your current phone firmware and most importantly, the CFW must be based on the firmware version that you previously download using NAVIFIRM. In other word, if you download original firmware version 51 (NAVIFIRM), do not download and use CFW that is based on version 50, 40 or older.
You may download Xtension^10 Variant-2 at http://forum.dailymobile.se/index.php?topic=22786.msg232730#msg232730 .
Mix Up Custom Firmware with Original Firmware
Custom Firmware doesn’t provide every single file that is needed for your phone. That is why we need to download original firmware using NAVIFIRM before. Same goes to Xtension^10 variant-2. It just provides Rofs2 and Rofs3 files only. So, extract the “ENGLISH ONLY Xtension (rofs2+uda).rar” and “Xtension_10v2.rofs3.rar” into a folder as below.
Then, open up the original firmware folder (the RM-356). Most likely, the files will look like the screenshot below but this is not a must. Different firmware version for different phone model may have different file names.
What we need to do now is change the CFW files name (from Extracted folder) according to your original firmware files name (from RM-356 folder). So as for my case, I need to change “General.uda.fpsx” to be “RM-356_51.0.006_026_000_U01.uda.fpsx”. Err..how do I know? Well, in RM-356 folder, there is only 1 file that end with .uda.fpsx right. In short, the files that I change is as listed below:
- General.uda.fpsx ===> RM-356_51.0.006_026_000_U01.uda.fpsx
- ENGLISHONLY.rofs2.V01 ===> RM-356_51.0.006_prd.rofs2.V22
- Wave1.Xtension^10v2.rofs3.fpsx ===> RM-356_51.0.006_C01_prd.rofs3.fpsx
The next step is, copy these three files that we already change its name into RM-356 folder (folder that contains original firmware files) and overwrite the original files. The idea is, we want to mix up original firmware’s files with custom firmware’s files. The reason is, custom firmware doesn’t provide every single file that is needed for your phone operating system. The author only supplies 2 or 3 files that he/she modifies. So it is up to us to prepare the additional files that are needed by our phone. That explain why we need to download the original firmware using NAVIFIRM previously.
So, once the 3 original files are overwrote by the custom firmware’s files (that we already change their name), our complete CFW is ready to be transferred into your Nokia 5800XM. Copy the whole folder (RM-356) into “C:\Program Files\Nokia\Pheonix\Products” directory. Or if you are using 64 bit operating system, copy the whole (RM-356) folder into “C:\Program Files (x86)\Nokia\phoenix\products”. Refer screenshot below (omit the RM356-0570196… folder, it was automatically created by JAF when I did flash my phone previously).
Please note that the folder (that store our complete CFW) in “phoenix\products\”needs to be named exactly as your phone’s model number. As for my case, my 5800XM’s model number is RM-356. That explains why I use folder name RM-356.
And for those who are already panic because they can’t find any phoenix folder in Nokia directory…don’t be. By default, there is none. I manually create the “phoenix” folder and “product” folder.
Preparing JAF Tools
JAF Tools is the software that we will use to transfer your complete CFW into your mobile phone. So, follow the steps below to prepare it. It consist of JAF installation and copy paste 2 files (ini file and PKEY emulator) into JAF installed directory.
Extract “Nokia Flash Tools.rar” (the one you download for JAF and PKey). You will find “JAFSetup_198.62.rar” file, “OGM_JAF_PKEY_Emulator_v 5.rar” and “(.INI FILE)(jaf_nok4models).rar” file. Extract all the 3 files.
Install “JAFSetup_1.98.62.exe” at its default location.
Copy “Jaf_nok4models.ini” and “OGM_JAF_PKEY_Emulator_v 5.exe” into “C:\Program Files\ODEON\JAF” or “C:\Program Files (x86)\ODEON\JAF” if you are using 64 bit operating system.
Then, make a shortcut for “OGM_JAF_PKEY_Emulator_v 5.exe” emulator to your desktop for easy access later on.
Transferring Complete CFW into your 5800XM phone.
If you happen to use Windows Vista or Windows 7 (32 bit or 64bit), you have to change JAF PKey Emulator’s compatibility first. Right click on the JAF Pkey Emulator and choose properties. Click on Compatibility tab and set compatibility mode to Windows XP (Service Pack 3) and set privilege level as Run this program as an administrator as shown in the screenshot below:
Run the JAF Pkey Tool from your desktop.
Ensure the setting as in the screenshot above. Then click GO.
An error box will appear. Don’t worry, just click OK button.
Then, JAF will start. Click on BB5 tab.
Ensure that Manual Flash, Dead USB, Normal Mode and Use INI are checked. Uncheck CRT 308.
Then select your phone model. As for my case, I have to choose RM-356 as expected. Next, click OK.
If you do everything correctly, your JAF will look like as the screenshot below.
All four green circles will light up (MCU, PPM, CNT, APE Variant).
And ensure the path for the firmware (as in the marked red square) is right.
Next, TURN OFF your phone and connect it to the computer USB. (It is recommended to shutdown OVI Suite completely. Right click OVI Suite icon in the tray (if you happen to run it before) and choose exit).
Click on FLASH button.
A warning dialog box will appear, click YES.
Then, press your phone’s “Power Button” for 1 second and release. Just 1 second. Not more. Else your phone will start up. WE DON’T WANT your phone to start up. We just want to allow JAF detect our phone.
Once the JAF could detect our phone, the flash job will start.
Note: Whenever JAF need to detect the phone, press your phone’s power button for 1 second.
Wait for a minute or two until the flashing process is totally completed (indicated by a series of ‘ting’ sound).
Post flashing step
At current stage, your CFW is completely flashed into your mobile phone. However, for Xtension CFW, there is a post flashing procedure. Other CFW may not have this step. This is entirely depending on the CFW’s author. The step below is the post flashing procedure for Xtension CFW (directly copy from the author’s post):
First Boot Optimization – Do not ignore this!:
(Ignoring this will result in a buggy phone)
– After flash operation, when the country selection appears , quickly input your settings (country, date, time)
– Do not press any key until the homescreen appears
– Now wait until you get this message “Phone will restart”. Press OK
– Let the phone RESTART
– After restart, open themes>homescreen themes
– Switch from one homescreen to another starting from the first to last
– After doing the above steps, apply “Widgetizer” HS now
– Set your homescreen shortcuts for “Widgetizer” HS in Settings/personal/homescreen/shortcuts
– Done!
Note: I do not do the 2nd last and last step (that I mark with red color) as I found these step are not relevant with Xtension^10 CFW. Perhaps it is needed for Xtension^1 – 9.
Next…
OK…it’s done. Enjoy your “new” phone and happy installing new themes, software (unsigned hehehe) etc.
A good source for wonderful theme could be found at http://gallery.mobile9.com/c/nokia-5800-xpressmusic-themes_1954/1/
Find more news and latest application update at http://dailymobile.se/category/applications-s60v5/
And to satisfy your “ehem ehem” version of software need, heads up to http://www.dreamstrikes.com/applications-series-60-5th-edition-mobiles/ (free forum registration is needed)
And many more….just spend some time with Google or Bings J
Conclusion
I realize that there are many tutorials around the web that are already cover this topic. I have no intention to repeat the very same things but I found most of the tutorial is not very (total) newbie friendly. Those tutorials are excellent. In fact, I learn how to do this from those tutorials as well. Only at certain part, the authors forgot to explain some basic things which make me sometime wonder…why on earth I have to this and that.
Due to the nature of those tutorial only cover flashing CFW, it doesn’t cover other parts such as the need to backup your phone (some reader might just jump flashing their mobile phone and then realize all their phonebook’s contacts, messages etc gone for good), find a good CFW and mention about post flashing steps.
For what it’s worth, I do hope this tutorial would complement other tutorial (if not cover entirely) and prepare the ‘complete-newbie’ user in this CFW scene to start their journey in flashing their phone with CFW. Happy Flashing (not the nude thingy okay …LOL )
One of the best GUIDE u will ever find ..Heads Up Bro ..really great
my phone get dead while flashing, phone don’t get started then only pls help me how to get my phone back my id is davdas22@gmail.com
Stated :
Error reading phone init data…
Please help… 😦
>>>>>>>>>>>>>SOLVED ERROR READING PHONE INIT DATA<<<<<<<<<<<<<<<<
open task manager and close nokiamserver….sumthing likee thiss proocesss
and start again…..then done!!!
Wen I try to flash its says error reading init data
Temme how to open task manager and go further
i too got the same error .. ..
still stuck there !
error reading phone init data.
no nokiamserver on the taskbar, what should i do?
awesome work ,,,keep d gud work goin,,ty 🙂
dude I’m james here from the Philippines,, I’m glad u found a way to help us newbies… i really love to flash my phone with your suggested cfw,, but there’s one thing bothering me.. i can’t download the ff: files;
RM-356_51.0.006_prd.core.C00
RM-356_51.0.006_prd.rofs2.V19
please help me dude, for there are just the files left before i can proceed flashing my phone… thanks in advance…
u can email me if u still have the soft copy of those files above at emban_2007@yahoo.com or jamestp@ovi.com
thank bro
God speed
@Desi, thanks. That comment really bright up my day.
@Stella, could we get more detail on that?
@James, those file need to be downloaded using NAVIFIRM. I can give mine but I can’t guarantee it has 100% compatibility with your phone.
Hi Expertester,
Could you tell me how to add flash file into installed/flashed firmwares. Like I want to add animations in my phone 5233.
Thanks,
Anant
expertester i need help it say’s Searching for phone…Found
Flash files are corupted or missing…pls help pls
when it shows flash files corrupted it means that firm ware not downloaded properly.so download firmware again try
dude please help me,, y is dat my phone won’t open now… it can’t be on (powe on)…huhuhuh please help me….
reflash your phone using original firmware (from navifirm) using JAF in offline mode.
Can i restore to original nokia firmware after flashing manual to my nokia 5233
hey bro is it possible to upgrade to nokia new firmwares after i flashed my phone to CFW??
Thanks
i think its gona work on all symbian s60 v5 phones using there respective firmwares
Hi, i found very detail tutorial here, but i am stucked at “Download Custome Firmware” & “Mix Up Custom Firmware with Original Firmware”
The link you provided will only download 2 files which is “Nokia_Pixel.rar” & “Core_UDA.rar”
and the link you provided is CFW (Xtension C6-02 / Nokia Pixel has been RELEASED) but you told us is “Xtension^10 CFW variant 2”
I compare both post the link and yours, seems like you wrote this tutorial later than the link. so i assume they din update the post after your tutorial.
I found other post about Xtension^10 English Only but it is for 5530, So i dont dare to take the risk.
So i have no idea where to download the file you said which is ““ENGLISH ONLY Xtension (rofs2+uda).rar” and “Xtension_10v2.rofs3.rar” ”
Can you advice what should i do next?
Expertester…. Im still waiting…wish to get guide from you….
@anson- dont worry… just follow the steps… I did that…. dont replave the v3 file… just do away with the first 2….its working
hellO..
i found this site is very usefull..
btw,im malaysian adn using blue 5800Xm..
i got prOblem while downloading these two files which are :
Rm-356_31.0.101_prd.rofs2.V22
Rm-356_31.0.101_prd.core.C00
i had tried almost hundred times but still when it already half way downloading, it seem to stop..
help me pliz…
am_gunners@yahoo.com
I HAVE TO THANK YOU A LOT!
i read tutorials on pnht.org and its instructions are unclear. they miss tiny details for newbies, like me. i ask ppl on pnht.org site questions, but nobody reply. Then, i found your instructions and it solves all of my problems.
My problem:
I cannot run PKEY shortcut from my desktop using Windows Vista. I just found out that i have to run it using Windows XP and click admins. it works!! Now i can flash my 5800!
Why cant pnht.org makes it clear and less confusing!!?
THANK YOU very much!!!
dude is it normal that after flashing, your product code would be changed? if yes, would it be tantamount as hacking your phone?
please help me, i wish to reflash my phone again…
Thanks dude, I owe you big one… This is the best guide ever to make every newbie understand the process… But I’d like to ask you something…
How do I detect my phone variant?
I’m from Iraq and I have NO idea how to do that accurately.
Thanks again for this awesome tutorial.
How the hell do i know my variant? Am from Tanzania in East Africa
i m frm saudi arabia
my mobile is made by hungry plz help me to chose variant
dude i already did flashed my phone 5233 to its latest firmware from navifirm but it keeps giving me same result my phone not spooling it turns black it can’t boot properly thats because of c6 modded cfw for my phone…and one thing i noticed when i flashed it back to c6 cfw its okay its boot properly…..i keep wondering why is it only c6 cfw works on my 5233 but when my original firmware it fails??? some suggestions??? please need help here….all the experts out there….i’m hopeless regarding this problem of mine…please…
hello! anyone? please help me! i keep getting error “Pkey dongle not detected, please insert activated dongle” , i have done everything as per the video so far. i have MMKMURAD JAF_PKEY_Emulator_v.11.0
great just absoulutely brilliant …the most complete guide resolved all my problems..very detailed and simple!thanks a ton!
Thanks buddy. This is one of the best GUIDE u will ever find ..Heads Up Bro
I finally got the guts to move to a custom firmware.
Its a Pnht firmware Its awesome.
Link:
http://forum.pnht.pl/showthread.php?1743-C6-V20.0.41-ported-to-Nokia-5800-V52.0.007-Fully-Working
emulator said error)Searching for phone…Not found!!!(
Please help me big bro
my nokia 5800 is dead after installing the c6 firmware, can anyone tell me how to get my phone back???hellllppp meee
reflash with original firmware..!!
thankyou very very much…
how to download Xtension^10 CFW variant 2??????? pls help…
awesome tutorial bro
i dunno how to download that from the forum… teach me pls.. pls reply ASAP.
@shafiee download ur original firmware from navifirm .Then enter ur rm no for “eg:RM-504 Ths for nokia 5530” and downld ur firmware and then flash wit jaf.
Can any one help me with the Pkey and JAF part?….it does not seem to load on my computer…(so far..i’m assuming maybe it is because my window is lower than requirement) so…is there any other ways to do it?…PLEASE HELP! THANKS ADVANCE
new navifirm version here
http://www.symbian-toys.com/NaviFirm.aspx#download
wow bro well explained…
Now flashing is nothing 4 me…. Thumbs up
Thanx again… 😉
hey great guide to help novice lyk me 🙂
i just hard formatted my nokia 5800 rm356 and my pc suite wont detect my fn…..m stuck in first step……m frm nepal and not much guys know abt this too….m helpless and stuck in middle of now where…..
whr cn i find a CFW lyk N8…..
just lyk u i dnt wish my fn becomes a brick….
I like this very much! but, i would like to know how i could return to the original firmware if anyone could help, i would appreciate it… Thanks
thnx bro…ur post really2 help me flashing my 5800 into n8..
i just following ur tutorial step but with cfw n8 tht i get from the forum n it works..
thnx a lot bro.. 🙂
hey!
wer r u found cfw n8 ?
n can u plz share some screenshots,if possible…
where’s for 5235
I really appreciate uf effort of this tutorial of yours. However their some points that somehow unclear for newbies (including me before).
1. After installing JAF, you mentioned to copy the “ini” files you included in the Flash Tools to the installed JAF default location. When we do the same, it prompted to replace an existing file. Yet you didn’t about overwriting such file or not. I think this should not be done since there’s already and “ini” file once you installed JAF.
2. You also mentioned to copy OGM_JAF_PKEY_Emulator_v 5.exe at the same location and make a shortcut in the desktop. Right now I learned that there’s no need to do the same.
Nevertheless, this tutorial is very useful to those who wish to flash CFW on their 5800.
Last week I successfully flashed my phone with cfw but I didn’t follow this tutorial. I did follow very simple yet very low risk of breaking your phone. To those who want the tutorial i used, I can send you the same thru email. I recommend to flash cfw Xperience v2 (updated to v3 last March 21, 2011) by FuRCoM. It’s fast, stable and absolutely bug free. I’ve been using it for more than a week now and no bugs.
Really appreciate you effort mate.
P.S. My phone brick on my first attempt using this tutorial.
I would like the link to tht tutorial .. pls send it to me on Hameed.ansari@hotmail.com
Please send me that tutorial at amolbagde@gmail.com.
Thanks in Advance.
Please send me that tutorial at “tuhin0174@gmail.com”
can u plz send me the tutorial 2 mohandharshece@yahoo.com
Pls send it to my e-mail jeppwy@yahoo.com
I would like the link to tht tutorial .. pls send it to me on sorumpinohotmail.com
I would like the link to tht tutorial .. pls send it to me on sorumpino@hotmail.com
JAF Pooling phone…Phone not found…[5530]
am trying windows xp
IT shows
JAF version 1.98.62
Detected PKEY: 90009B6C
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
Searching for default location of ini…
Checking path: \Products\RM-504\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-504\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.rofs2.V06
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_007_000_U001.uda.fpsx
Changing mode…
Detected P-KEY: 90009B6C
P-key nokia module version 01.02
Init usb communication…
Done!
Detected P-KEY: 90009B6C
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting……….PUBKEYS already sent…
…….Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 654, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.rofs2.V06…
Erasing cmt zone 02FA0000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_007_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_prd.rofs2.V06…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_31.0.005_007_000_U001.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
Phone not found…
Second try…
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
What to do Please Help me 😦
It only happens if you have not added correct/required files. I also faced this problem many times.
I did all of the steps but when i tick ini and chhoose the phone model JAF stops at checking path ……RM-356/
Can anyone tell me what i am doin wrong
Thanks
I live in greece and got my 5800 from greece
but i cant find my region in navifirm.
What should i do??
sorry for bad english
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini…
Checking path: \Products\RM-356\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Then nothing happens.. plz help!!!!
Cant find my phone varient in navifirm….what should i do????plz helpppp..plz plz plz.
.Cant find my phone varient in navifirm….what should i do????plz helpppp..plz plz plz.
Navifirm is not only the way…you can google it and find out a firmware for your phone. it did the same for my e62. it is working fine.
Hdgg jhrg po 7
Thanks a lot for this tutorial.
I have no experience in flashing a cell phone. I did it successfully in first attempt
Now i have the latest firmware in my E62 Nokia phone.
Thanks again
hey i followed your method & successfully installed the firmware but my music player cant find music in my memory card so please tell me where to put music file.
I hv done every thing placed 6file which include rofs2 nd no rofs3 nd all the
required files place for download in the folder nokia/phoenix/products/
RM-356
Nd installed Jaf
Bt still i am getting this as follows…: Checking Windows version …
Windows version: Microsoft Windows XP Professional
Searching for JAF install location …
Saved winscard.dll to: C:\Program Files\ODEON\JAF\winscard.dll
Saved original.dll to: C:\Program Files\ODEON\JAF\original.dll
Starting JCOP emulator … Saved JCOP.EXE to: C:\Program Files\ODEON\JAF\JCOP.EXE
JCOP emulator started succesfull on port 8050
Powering JCOP simulator …
Uploading PKEY applets to JCOP simulator …
Verify installed PKEY applets …
PKEY applets ready to use Generated PKEY details: [SN: 9000A016] [TYPE: PKEY Raskal]
Starting JAF Main software …
KEEP OGM PKEY OPENED UNTIL WORK WITH ANY JAF SOFTWARE And nothing happens aftr this..
I am a newbiee in this flashing plzz plzzzzz i want to flash my phone with
ur custom firmware plzz detect my problem nd help
me..plzzzzzzzzzzzzzzzzzzzz……! I am working on this from last2 weeks bt nt succesful..
Plzz…
Nd if u hav a facebook id plzz give me the link..so i cn add u to talk ol9.. Thnkz in adv..
Plzz help me
plzz help
/\
I am getting this nd it is nt proceeding further
Checking Windows version …
Windows version: Microsoft Windows XP Professional
Searching for JAF install location …
Saved winscard.dll to: C:\Program Files\ODEON\JAF\winscard.dll
Saved original.dll to: C:\Program Files\ODEON\JAF\original.dll
Starting JCOP emulator …
Saved JCOP.EXE to: C:\Program Files\ODEON\JAF\JCOP.EXE
JCOP emulator started succesfull on port 8050
Powering JCOP simulator …
Uploading PKEY applets to JCOP simulator …
Verify installed PKEY applets …
PKEY applets ready to use
Generated PKEY details: [SN: 9000A016] [TYPE: PKEY Raskal]
Starting JAF Main software …
KEEP OGM PKEY OPENED UNTIL WORK WITH ANY JAF SOFTWARE
cummon..
Smone plz rply..
I am in damm mesh..
Plz help ur junior’zzz
hey mate is your problem solved?
hello! everybody..
m lookin for n8 cfw for my 5800XM..with smart dialler.
if anybody already hav it,please share with me…
thanks in advance…
JAP does not show me my phone model (RM-559, Nokia X6) what can I do ?
plz help me regarding this..
the theme is for S^3, dude? thats not compatible with your s60v5 phone…
theme mistake …. fules r missing ..install some other theme ! 😛
plzzzzzzzzzz help me i install nokia 5233 firmware
show error
Finishing CMT session…
Restarting CMT…
Pooling phone…
Phone not found…
Second try…
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
Have you press your power button for 1 seconds when the software is trying to find (pooling) your phone?
Thank you so much, it was a great help, saved me hours of trying (found it after trying for few hours already…).
hi! please help. My nokia x6 won’t turn on after flashing…
what can i do?
I have the same problem and I don’t know what to do.
I have followed this exactly as you have posted but I get this,
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-333\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
I am trying it on a Nokia N85. I downloaded all the files from NaviFirm but these files are still not there.
Also where can I get custom firmware for the N85?
Thanks
hi dude its awesome thing but let me know can this be working on nokia x6
@devesh.
You can’t install CFW for Nokia 5800XM to your X6. But obviously, the method is more or less the same. Both phone use S60V5.
@kloyd;
No worries. You can always restore your original firmware. Just copy the original firmware you download from Navifirm (all) into respective folder (as for my case, RM-356 one) and flash it again. Refer to : Transferring Complete CFW into your 5800XM phone.
@Shane;
Please. Don’t brick up your phone. You have to ensure 2 things at least.
1. If custom firmware for N85 is exist.
2. If yes, does it stable.
3. Is the custom firmware’s version number is higher (or equal at least) with the one you pull from Navifirm.
@Khurram,
Sorry. I watch your video 2 times but can’t see anything. Too blurry. Please elaborate your problem here.
@nittin,
You can always check at dailymobile.se. They have tonnes of CFW.
I could not locate any custom firmware for the N85. I just tried flashing with standard one but not the Orange one but that didn’t work but its not bricked.
plz help me when i flashed my phone with navifrm firmware and jaf and then it say cant pool and i switched on my mobile nokia 5233 nothing comes plz help my father will beat
Please read carefully the guide.
The key is, when the JAF is trying to search (pool) your phone, you have to press power button for 1 second. Fail to do this will cause “can’t pool” problem.
Good luck.
pool was done but then also my phone dosent start white screen came and pool done but phone not opreated plz help again????????????????????????????
nice tutorial…m happy to see many malaysians also try to flash thier phones…
try this cfw…its great and im using it..
http://forum.dailymobile.se/index.php?topic=48651.0
its based on n97 mini..
nice bro….
Btw,pls do visit my blog…
new cfw there…http://wp.me/ppcZa-p8
Hi Thaq/All,
I have my own blog related to Technical Writing. Could you help me that how can I make my SEO, so my blog will be appeared in Google Search?
Awaiting your feedback.
Thanks,
Anant
@Wasan, if you miss some step or mix the file wrongly, this could be happen. Don’t worry though. You can always flash your original firmware (from navifirm) and flash it back.
@BloodCrazy, nice CFW. Look tasty as well. Might try it later but subject to my wife approval LOL. I gave 5800xm to her already since I use Samsung Galaxy SII (Android campers now).
@ expertester, you should really try that CFW tat i gave ypu…you wont regret it my friend… =D
is this possible in my nokia 6233???
I have followed this exactly as you have posted but I get this,
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-333\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NON
I TRY TO 5800 XM, BUT IT KEEP SAYING NO INI FILES FOUND…
HOW?
1 question, are you sure your model phone is RM-333?
As far as I know, RM-333 is N85.
I’m using nokia 5233 but having same problem.
just select the files manually…
thankzzzzz yrrrr
u reallyy rocked man
Can someone link me to cfw for RM-333 N85 so I can unlock it from Orange UK.
Thanks
Even i am having a problem that JAF is not able to find ini files.
I am using nokia 5233 and i have done rest everything exactly as the procedure says.
Please reply asap.
hi! nice tutorial…
some crazy doubt… i bought the 5800XM from London but using it in India… so in NAVIFIRM which variant i shud download?? that of United Kingdom or of India!!!
I think it shud be UK’s//// and if it is… then there are 3 variants of Red V5 with same product code (0575581) …which of the 3 i should d/w ?????
Hi!dat was a really nice tutorial….but i just wanted to know that by any chance if my phone is bricked what should i do… Please do let me know
@Vardaan: please state your phone model, your CFW and folder structure that you use to store your CFW (for JAF).
@himzztech: yes, you should use UK variant. Doesn’t matter which one as long as the release number is equal or higher than the one in your phone now. Please make sure your CFW release number and the one you wanna download form navifirm has identical release number. Else, they wont mix well.
@Pema: Just flash your phone with original fimrware (the one you download from Navifirm) using JAF. That will restore your phone even it was bricked.
Hey Dear,
I’m writing this with so much pleasure. First of all I need to say that this method works for Nokia N97 RM-505 (My phone model).
There was a keyboard problem with my phone & I could be able to solve it by flashing firmware.
I’m really Thanking you for publishing this kind of very helpful information.
Isuru Wijayawardane from Sri Lanka.
Hey i did it. And i’m sure i did everything you say. My phone is opened but there didn’t appear “restart your phone”. Please help me.
Please answer me please i really need help. I did it but i can’t open menu. I got error Loading suite configuration returned error: -32397. Then System Error.
friends…..do visit here…latest cfw…july 2011 updates…
i can`t run the navifirm…it always says…application fail to initialize properly
Good job Friend,
This information is really useful and easy to understand. Actually I am using Nokia 5233 and I have flashed it may times by using these tools. And, as you said that nobody should not worry about their phone to install new firmwares. I am a new user to use firmwares, at the beginning I was also careful about my phone but after discussion with one of my Facebook friend I agreed to do this.
So follow above steps carefully and properly (do not miss anything) and flash your favorite firmware on your phone and enjoy!
Note: You people can contact me on Facebook (Anant Walake) or Gmail (akumarcom@gmail.com)
Thanks,
Anant
hi friend,i don’t have experiences in flashing mobiles but im interested in doing this thing so
i need your attention to help me,i have a ( nokia 5800 RM-356 Ver 52.0.007 and the custom ver is
52.0.007.C04.01 )..the matter is i just have the mobile and a good laptop with windows 7 ultmate..
now i saw a new type of os that can be installed to this phone on this website please check it on http://www.symbiantweet.com/symbian-anna-custom-firmware-v6-2-for-nokia-5800-5530-5230-x6
now i want to install that Symbian anna to 5800 so what do i need?what softwares should i download ? what cable should i buy ? what should i do ?please help me and please send your replay to my email because i have very slow net connection,if you send to my email i can easly open in my gprs thanks a lot and please replay fast thanks.. E mail is ( loginsubhan@gmail.com )
All your question has been answered in the original article. Please read from A to Z. Regarding cable, just use Nokia standard data cable that come with your phone.
thanks.
hey thanks buddy for the information !
i have one serious problem , today i imported a cfw from SYMBIAN LATINO
its “symbian 6.2 para anna cfw” 😦
everything is fine … but i dint find keyboard anywhere and thats really annoying !!
please help me buddy with this issue , i ll b very much thankful to you !
if u know d solution then post it here or else on my e mail id … neel.virtapay@yahoo.com
lol, This is so totally awesome!!!!!!! I’m from South Africa, and thanks to your guide my phone is now running CFW. Before i read through your guide, a was completely lost. But now i’m informed and ready to try out some great CFW. Thank you again for putting all your hard work into developing and sharing this guide with us. I’m using a Nokia 5800XM by the way.. 🙂
Hi thanks for the tut. I am experiencing the ‘no ini files found’ problem please help!
hey
the firmware files which i have downloaded from navifirm are the following
RM356_0573797_52.0.007_002.dcp
RM356_0573797_52.0.007_002.vpl
RM356_0573797_52.0.007_002_signature
RM-356_52.0.007_026_000_U01.uda.fpsx
RM-356_52.0.007_C03_prd.rofs3.fpsx
RM-356_52.0.007_prd.core.C00
RM-356_52.0.007_prd.rofs2.V19
and the cfw which i ‘ve downloaded is following
(9)RM-356_51.0.006_prd.rofs2__ReBuilt_ReBuilt.V01
with what file should i replace the cfw file?????
plz plz plz help meeee!!!!!!
hey my fone version is 40.0.003 n i want 2 update to v50.0.001 do i need 2 use rofs3 file ppl say usin rofs3 file while flashin will brick our fone
Hi,
I am used this CFW for my 5800 RM-356. Everything worked like a charm.
But I am not able to type any text messages, cannot type contact name, etc. Basically whenever there is text input required I am not able input text as keypad is not showing up.
Also after clicking any application it shows hour glass as per videos for Symbian ANNA 6.2, but it is not showing that as well.
Please help.
same prob wid me dude… i flashed anna cfw on my x6 and there’s no keyboard. hav u found any solution????
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-505\RM-505_22.0.110_prd.core.C00
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-505\RM-505_22.0.110_prd.rofs2.V17
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-505\RM-505_22.0.110_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-505\RM505_507_22.0.110_uda_4_001.uda.fpsx
Languages in ppm: English,Filipino,Bah Indonisia,Bah Malasia
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
“Searching for phone…Not found!!!”
Everything asides that last line works and I have reformated the phone countless time and started procedures over again yet it doesn’t pass that line. How do I proceed? Thanks
[…] […]
When it mention press the power on now, do you press the power button less than 1 second?
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 873, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V21…
Erasing cmt zone 02FA0000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C02_prd.rofs3.fpsx…
Erasing cmt zone 09360000 – 09E5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V21…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C02_prd.rofs3.fpsx…
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
MCUSW: V ICPR72_10w25.3
11-10-10
RM-504
(c) Nokia
APESW: V 32.0.007
VariantSW: V 32.0.007
Prodcode: 0578168
Done!
all done .. wot to do next ? my phone doesn’t power on .>! whn i try to start it it just vibrate n keep on silent ..!!
help plz
phone is dead after downgrading what to do not starting
only vibrating after holding power button and nothing is hapening
is there any solution ??? plz help me i am using nokia 5233
LOL, the author already stated that ‘downgrading will brick your phone’. You can’t downgrade your phone. You have to use current firmeware (relative to what preinstalled in your phone) or latest firmware.
Try to flash with latest firmware. Not cfw. It work for me.
i ve done all the procedure correctly and finally flash my phone … but at last … it stuck .. it appear this message , “phone didn’t response , if the phone is not started yet , please wait for the phone to start and connect to to usb , then press YES to continue , If the phone is not responding press NO. why is this happend
PLZ HELP ME
I FOLLOW UR STEPS BT WHEN I CLICK ON USE INI……BOX APPEARS WHICH IS BLANK(NAMED CHOOSE UR MODEL)……WHEN I CLICK OK….IT SHOWS THAT..’Checking path: \
Searching for default location of ini…
Checking path: \Products\\
Searching for JAF saved location of ini…
Checking path: *.vpl\
No ini files found…’
AND NOTHING HAPPENS AFTERWARDS……
ALSO WHEN I INSTALLING JAF SETUP….AFTERSOME SECOND IT SHOWS ERROR -CALLCLASSINSTALLER(REGISTERDEVICE) FAILURE:(0xe0000235)….I CLICK OK…THEN IT SHOWS…..MAIN FAILURE(0xe0000235)…THEN STEUP CLOSES……i use windows 7 64bit…..
I DONT HAVE PHEONIX FOLDER BY DEFAULT…..BT AS U TOLD, I MAKE IT….C:\Programs Files(x86)\Nokia\Pheonix\Products\RM-504…..as i am using nokia 5530xm…..
help me plzzzz to carry out the flashing process….
if possible plz plz sent the solution (in detail).to my email-garg.devesh09@gmail.com
I’M KEEN WAITING FOR UR SOLUTION(REPLY)
THANKS…..
please help me
i think my phone is bricked.
i tyed to install krystal on nokia 5230 rm 588
i chose v50.0.0001 whuch is the same firmare which was on my phone.
it doesnt start just vibrates.
what to do now.
this is the lines from jaf
Init usb communication…
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.core.C0r
PPM Flash file: C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.rofs2.V01
CNT Flash file: C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_C02_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Pheonix\Products\RM-588\RM588_50.0.001_000_000_U001.uda.fpsx
Languages in ppm: English,Finnish,Swedish,Norway,Islandic,Danish
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Not found!!!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
No write data, skiping write…
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting…………PUBKEYS already sent…
PUBKEYS already sent…
……..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 913, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.core.C0r…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.rofs2.V01…
Erasing cmt zone 02EA0000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_C02_prd.rofs3.fpsx…
Erasing cmt zone 09160000 – 09E5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM588_50.0.001_000_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0100
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.core.C0r…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
cmt->PAPUB keys already sent…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_prd.rofs2.V01…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM-588_50.0.001_C02_prd.rofs3.fpsx…
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Pheonix\Products\RM-588\RM588_50.0.001_000_000_U001.uda.fpsx…
No write data, skiping write…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
MCUSW: V ICPR72_11w10.1
15-03-11
RM-588
(c) Nokia
APESW: V 50.0.001
VariantSW: V 50.0.001
Prodcode: 0585381
Done!
hi! I have have completed all the steps for flashing my C5-00 but i having the problem that software is not detecting the phone for flashing……..Searching for phone…Not found!!!
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-645\rm645_071.005_prd.core.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-645\rm645_071.005_11.01_MEA_C_prd.rofs2.fpsx
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-645\rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-645\rm645_071.005_U040.000_prd.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Not found!!!
Hallo,
I have a little problem i have a nokia 2730 classic try to debrand upgrade the firmware i used my laptop and i try upgrading it but i went for a smoke when i came back the DAMN laptop battery was empty so it went in hibernation lol but now my phone wont start up again this the log:
Searching for default location of ini…
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\Products\RM-578\
Scanning ini files…
Searching for default location of ini…
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\Products\RM-578\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\Products\RM-578\rm578__10.45.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\Products\RM-578\rm578__10.45.ppm_af
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\Products\RM-578\rm578__10.45.image_af_black
APE Variant file: NONE
Languages in ppm: English,French,German,Netherlands
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader…
Patching RAW boot step2…
Sending RAW Loader…
……………….Loader Sent!
Stage 2 starting…………………………………………………………………….Loader Sent!
Stage 3 starting………………Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Phone failed to boot in flash mode CMT…
Can somebody out there help me!! need this very bad
Thanks in advance
tried all the above steps on my nokia n85 with original firmware RM-333 Product Code 0561228
But when phone restarts, tells me Phone start-up failed. Contact retailer.
please help… anyone.
NB.. i’m from Kenya, East Africa and used SSA (Sub Saharan Africa) Multi Copper and Copper variant
can i flash my 5800 with the c6 original firmware which i downloaded by navifirm ?
You can’t.
according to what you say , i must download a hacked version of the firmware so as to work so can you give me a link to a good version of the c6 but i want it the nearest version to the original c6 version please.
how do we know our phone is ‘red lining’ or ‘blue lining’?
Owh, doesn’t really matter actually. The red or blue or even white is just to make your firmware come with the right theme.
another problem..when i try to extract pkey emulator, it said it can’t be executed..what should i do?
remove battery from the phone and there is device id written like 0574330. which will match with the lining and country where you bought from in navifirm.
i have nokia 5230 mobile can i flash succesfully vithout getting ma mob bricked ..becoz i hace tried flashing ma mob using JAF bt aftr flashing it came
done
but my mob did’nt switched on at all…so help me can i flash succesfully tis time using ur procedure……..me from india
I can’t be really sure for non 5800XM.
help me !!!!!!! can i succesfully flash ma nokia 5230 vith c6 firmware……using ur procedures nd JAF
This is really helpfull article and you have explain everything compleetly… wow.. Thank you dear……….
man….my navifirm…its not working..application error..
somebody…please help me…
one of simplest and best of its kind !!
hands of to this tutorial !! 🙂
Hi there, how can I bypass (or reset) the security code? I have tried a hard reset to bypass the security code, according to your specs, but it still requires a code after selecting the country.
Bought my phone in South Africa and living in Holland, it was not supposed to be SIM locked, but you guessed it…. I cannot use the phone with a local SIM!
As the phone is still under guarantee (for another 2 weeks) it can be done for free at Nokia if I take it back to SA. I was quoted 35euros to get it done here. Outrageous!
Can anyone assist me with this? At the moment, I only use the phone as a very expensive camera.
Thanking you in advance
First, ensure your phone model number as I mention above. Download (latest) original firmware using navifirm (other country than SA). Flash it.
In order to do this, you don’t need to hard reset your phone. It will basically format your phone using the newly downloaded firmware.
Hi there, thank you for your response.
Followed your instructions again but got the same issue. I cannot use a different SIM. Gosh, I cannot even start-up without getting a “Lock code” prompt. (12345 doesn’t work)
Should the procedure (flash) be done with or without the SIM installed?
Tried 3 different countries with the same result, phone stay locked. The phone can only be used with the original SIM, others end up with a request for a “Lock code”. No go without the original SIM card installed.
Firmware flashed as I have different phone lay-outs and menus and no error messages are generated during the installation.
I thought by flashing the firmware would remove all locks. Where do they store the lock code or SIM lock might it be hard coded?
ALL I need is to be able to use my phone with a different SIM…. two year contract expires tomorrow.
By the way, I saw a (UN)LOCK button on J.A.F. but it’s not functional. 😦
Any other suggestions?
u asshole, NOKIA FLASH TOOLS.rar has a virus……. F**K you…..
how can i remove the CFW from my 5800 XM Rm-356
I have Successfully flashed my Nokia 5800 XpressMusic RM356, With firmware 52.0.007 but i don’t need Quickoffice with the firmware, this consumes lot of phone memory,
So according to you which firmware will be best suitable for my fone with better phone memory space and sufficiently required softwares.
when i download cfw files from pnht or some other cfw forums they contain only rofs2.
u told we require rofs2, rofs3, and uda.fspx files.
what to do?
hey expert bro…i hav followed all your steps..and downloaded everything.but man..at the time of flashing jaf says phone not found!!!..i tried aloooot but couldn’t… i pressed for 1 sec also but also..it didnt….so i tried unticking dead usb…again jaf said..phone rebooted but not in flash mode…what does it means..??//my phone is not coming to flash mode…plzzzzz help me….
dude ive been trying to download extention but the site keep saying that my e mail needs to be validated so till now i dont have it…hope you could send me yours..il appreciate it very much..thankyou.
kindly send me the extention pls..my e mail add. hip.lips@yahoo.com
hey..am thank you for this useful pst..!! but i gotta problem..!! but in C:\Program Files\Nokia\phoenix\products..i bymistakely deleted the folder RM356.. folder..!!! so…plzz can u tell me wat can i do?? 🙂
when i click flash it shows
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.45.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Searching for default location of ini…
Checking path: \Products\RM-625\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-625\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
help me plz……………..
when i click flash it shows
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.45.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Searching for default location of ini…
Checking path: \Products\RM-625\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-625\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
help me plz……………..
do u know how u flash android into x6?
my jaf wont start up it says : pkey dongle not deyecyed. please insert…….
please help me,,,,, i kno this is noobish……….. pls
i hve da sme prob wif u..n i also don know what 2 do..haha..expertester pls help us..
Wow. Great tutorial.
I want to try it on my 5800 .. but I have type RM-428.
All the CFWs that I see on DailyMobile etc are for RM-356. Can I install RM-356 CFW on RM-429 phone? Any advise on doing that?
Thanks!
thanks a lot bro!!
hi buddy , many many thanks. becoz of u I able to flash me briched 5800 .thanks..
Thanks for such a nice tutorial. i have successfully flash my fon. but my problm is there. i am facing the problem when i try to instal any software in my set using wap. when setup is start an error show”no secuarity certificates on phone or sim” and set up is closed. i read many tutorials, search many sites that how i can solve this problem. answer is update your phone with nokia sw updater or flash your phone. i have done both methods but no vain
if some one suggestion you have plz help me.
HEy budddddyy can anyone tell me CFWs for My NOkiA C301 Touch anD tyPE Rm-640
Wondaful 5 stars. this was the most clearest tutorial on net i found so far. thank you..very mcuh
man u r genius
such remarkable and detailed tutorial with step by step instructions and warnings….wohooo
i flashed my phone
at start i was like….about to faint….but kept following your instructions and i was succesful
thanks to u mate
however i has to suffer the problem in choosing varient
mine in nokia 5800 RM-356 made in hungary(as writtten below battery cover) silver(grey) lining but cant find any varient having exactly same product code as mine……need ur hellllllppppp here plz
thanks
Actually, any variant will do. What important is RM-356. The variant is just to maintain your localize setting (language, theme etc). Since you are going to install CFW which has custom theme and setting, the important of variant is no longer significant.
i tried to put v7 as well as v6.2 in my 5530 v40 but it din happen …. can u pls pls tell me d procedure how to do it ???? pls pls rply asap
ini file not found!!! where i can download that?
Hi I flashed my nokia 5800 following your instructions but after flashing the phone doesn’t start.
What should I do?
Re-flash with original firmware (either from Navifirm or other source and makesure version number is equal or greater) using JAF.
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.48.0
Changing mode…Done!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
Reading…
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini…
Checking path: \Products\RM-356\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-356\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.101_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.101_prd.rofs2.V01
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.101.502.02.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_026_000_U01.uda.fpsx
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
Searching for phone…Found
Reading SW version…Error reading rap ver!
help me please!
Stage 2 starting……….PUBKEYS already sent…
…….Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Phone rebooted but not in flash mode…
wht shld i do…. pls hlp
no ini found…
what to do to solve this …..
i use 5800 XM RM-356 From India….
ThanX in ADVANCE…
Thanks so much,In the beginning i was afraid to flashing my 5800 but ur explain for everything make it so easy ,i recommended everyone to install CFW it is smthg make ur phone like magic
Thanks again
navifirm not working keeps saying error is there something i am doing wrong ???
it keeps saying “An error occured when attempting to download firmware information”
“[soapExecption]
service specific exception: com.nokia.posti.server.caresuite.webservice.internalerrorfault”
Please help
This is from navifirm
Thanks
Jaf modul,,,
use ini abort error,,,,? why?
PLACE HELP J.A.F AFTER FLAS DONE .BUT DO NOT IMEI READ PLEACE HELP ME
Hi dude,
Which is the best CFW for nokia 5800 rm-356 v60.0.003?
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.48.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini…
Checking path: \Products\RM-356\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-356\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C03_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using —øÍž012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting………………PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
………..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 670, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19…
Erasing cmt zone 02B60000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C03_prd.rofs3.fpsx…
Erasing cmt zone 09160000 – 09E5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx…
Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C03_prd.rofs3.fpsx…
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
but my mobile is not booting.. blank screen is there (Local mode Nokia).. pls help
Any Help did you get?
hi,kannan,i’m also a victim of dis problem with which u r suffering……with so many trials and attempts ,i didn’t found the solution…..so,if u have founded d solution then plz ….help me …..n send the solution or process 2 get rid of dis problem……u may post it here or send it 2 my email id…..’sanjeevkamal1306@gmail.com’……………i’ll be very much grateful to u for ur kind help……..sanjeev.
Can someone please help me urgently!!! I stuffed my phone up! 😦 Send an email to currykid@live.com.au if u can help THANKS SO MUCH!!!
INI files are not found..models of the phones are not showing…plz help me out
INI files are not found..models of the phones are not showing…plz help me out
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
Error booting phone…
Occur during flash process. i press the power button for 1 sec but still it does not detect my phone and then “Error booting phone…” message displayed. help ME
is it ok if the process took a long time ?
i cant insstel nokia phoenix in my pc help
Hey im having nokia 5800 xpressmusic with version v60.0.003 can i flash my phone with v51 pls telll
my nokia 5800 is dead after installing the c6 firmware. i also tried with default files from NAVI, but unable to get back to original status of my mobile.. plz help…
hello u all can help me?i having some problem..when i update my nokia 5800xm to v60.0.003..i can’t open theme setting..please…
i have nokia 5233 and wants to flash with VELOCITY^1 .
help me to do it.
hello everybdy…
a very huge thanks to expertester..
i was totally a newbie & really had no idea about flashing.but after going thru this blog & other sites i successfully flashed my nokia 5800xm with symbian anna v7.5..hats off to you bro…really a fantastic guide..
i wud like to share few points with all of you & newbies like me.
*install navifirm & download the nokis firmware as per ur cell model no.,
*open the folder where its downloaded & you`ll see the following 7 files:
RM356_0559673_60.0.003_001.dcp
RM356_0559673_60.0.003_001.vpl
RM356_0559673_60.0.003_001_signature.bin
RM-356_60.0.001_026_000_U01.uda.fpsx
RM-356_60.0.003_C01_prd.rofs3.fpsx
RM-356_60.0.003_prd.core.C00
RM-356_60.0.003_prd.rofs2.V19
now after installing your custom firmware which you wud like to hav in ur cell
just check that there are exactly the same no. of files i.e, 7 as in original firmware.
now just match each n every file & its extension (i.e, with which it ends) and copy the files which you see are missing in ur customfirmware.
in my case file “RM-356_60.0.003_C01_prd.rofs3.fpsx” was missing so i just copied it in my RM-356 folder from the original firmware.
and flashing was successfull…
once again thanks bro…keep it up..really great work…(atleast for me it is)
my 5800 have firmware version 60.0.003. and i downloaded following files via navifirm ,
RM356_0558982_60.0.003_001.dcp
RM356_0558982_60.0.003_001.vpl
RM356_0558982_60.0.003_001_signature
RM-356_60.0.001_026_000_U01.uda.fpsx
RM-356_60.0.003_C01_prd.rofs3.fpsx
RM-356_60.0.003_prd.core.C00
RM-356_60.0.003_prd.rofs2.V01
plze bro can u explain little bit how can i convert my 5800 to c6. plz bro really want this plzzzzz.
Boa tarde!
Tenho um Nokia 5800 Rm-356 Firmware V:60.0.003. E gostaria de saber se tem como eu instalar uma verão anterior (51.0.006 ) Já baixar a versão anterior a 60.0.003. fiz o procedimento correto de instalação, mas ao finalizar ele pisca três vezes a tela branca e não conclui, e nao liga mais..
Issu acontece pq nao pode instalar o firmware anterior?
Tem como voltar o firmware anterior com outro modo?
Desde já agradeço pela força!
hey i got a Chinese modal of Nokia 5233, can i install this firm ware on it???? if yes can u tell me how to ??? thanks in advance!!!!
Great man. You explained the things the best way.
hi every 1,i wanted to flash my nokia 6500s RM-240.after flash it dead,i flash again ,then on jaf it said phone can’t be found,its not even powering on.plz help
just install nokia pc suit and try i think it will work
after flashing my nokia 5233 i am not able to restore backup of messages. Can anybody tell me wht to do …so that i can restore my messages ???
thanx !
my nokia 5235 after flash with rm-588 nokia 5230 not start polling not found and just vibrate when pressing switched button
I wonder, why did you use firmware version 21 when version 50+ is already release. A quick google check give me this wiki : http://www.cpkb.org/wiki/Nokia_5230_5235_RM-588_firmware_data_package_download.
By the way, I did mention in the article you may brick your phone if you flash firmware that is older than your existing phone’s firmware right.
To fix this, download latest firmware for your phone (with the right model and country) using Navifirm and flash it back to your phone using JAF.
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.45.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Searching for default location of ini…
Checking path: \Products\RM-625\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-625\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
No write data, skiping write…
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting…………PUBKEYS already sent…
PUBKEYS already sent…
……..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 892, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21…
Erasing cmt zone 02E80000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx…
Erasing cmt zone 09160000 – 09E5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F47FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx…
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx…
No write data, skiping write…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
Phone not found…
Done!
please help me for above log.. my phone is brick.. up to pooling it is ok, whilw pooling it blicks the screen in black n white colors n finally it displays phone not found.. what should i do now, plz help me in urgent..
sorry for my enhlish.. 😦 😦
yaar think its becz u have flashed ur mobile with wrong firmware… do one thing just google pnht and create a account u will get the solution 🙂
i think flash files not downloaded properly.
download firmware again and try .
i bought the 5800XM from London but using it in India. Couldn’t find the UK variant !! 😦
i bought the 5800XM from London but using it in India. Couldn’t find the UK variant in navifirm 😦
dude google “pnht” create a account…. u will find d solution 🙂
shot for the excellent intel.
i decided against flashing my phone.
way to risky.
JAF version 1.98.62
Detected PKEY: 90009B6C
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.45.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini…
Checking path: \Products\RM-356\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
files not found ,i did every thing correctly …wht 2 do now..??
u didn’t copy the firmware in correct location . copy it in C:\Program Files\Nokia\Phoenix\Products and flash again
thanks alot dude GBU
while phone flashing jaf closed unexpectly. my phone is not poweron what do plz help
How can I Flash my C6-00 when it doesn’t display any C-Series in “Select Phone Model?
hi my code is 0546862
nokia 5800XM red rm 356
i can’t find the appropriate variant in navifarm
plz help
great job bro…….thanxx
hey bro plz help me..
im using nokia 5800..
it is saying..
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
what to do now???
copy the firmware in correct location. check the copied laction and copy in C:\Program Files\Nokia\Phoenix\Products\RM-356\ and then flash
copy the firmware in correct location.
copy it in C:\Program Files\Nokia\Phoenix\Products and flash again
Create a folder like rm-556(nothing but your phone RM code)
Bro ur just awsm
hey dude i can’t get cfw for nokia x6 RM-559..can u plzz help me……..
I am little confused about choosing a correct firmware for me . i have v 51.0.002.C01.01 custom firmware installed in my nokia 5230(rm-588) (i upgraded it by FOTA). Now i know that i have to choose a custom firmware that should be based on a firmware ver. greater then or equle to my current v. (that is 51.0.002).now my question is that should i have to take both firmware(custam and original (downloaded via navifirm)) with same version or there may be any freedom in choosing them… Pls reply if anyone know about this
Thnx in advance and sorry for my english.
Can we used pheonix instead of jaf for flashing cfw…?????
plz reply me…
u can use phoenix also.but it is easy to flash with jaf
hey i have downloaded a cfw which has rofs2+uda , vo5 but not rofs3. so should i replace these 2 files in the original fw leaving the rofs3 original?
when i m trying the 3file method n rename the core to .COr
then it is not opening by mcu
when i click mcu
Its just awesome. But i’m still sacred about doing it or not. See you’ve described about 5800 & i’m using 5233. I guess both are same but 5800 have some advanced features. So if you can describe this process for 5233 then i would be greatfull. Plz do reply me through mail. I’ll be waiting dude.
Thanx alot. 🙂
I don’t know how to save the firmware in the C/ program file/phoenix / etal folder. Since it is not listed in the nokia folder
For knowing variant of nokia 5530.
Remove back cover of your phone ,
under battery space where phone info is given i.e emei make etc. There’z product code
something like 05XXXXX….note that…
now open
match your product code …..& you have your variant….:-)
@Joel, if you read the article thoroughly, you will have no issue with non existing /nokia/pheonix/products issue. Do not flash your phone unless you read the article/post from A to Z at least twice (for newbie).
@Rameez, no worries. Although it sound scary, it is not actually. If you happen to brick your phone, just reflash it (using JAF) with your phone original firmware (download it using Navifirm).
[…] Posts AHCI vs IDE – Benchmark & AdvantageHow to Install (Flash) Custom Firmware Into Nokia 5800 Express MusicHow to delete locked file/folder in Windows 7How to enable AHCI : Windows XPHow to send email from […]
THE BEST TUTORIAL EVR…FLASHED SUCCESSFULLY…
wan2 ask a que…if im on a CFW and i wan2 change it to another CFW dan can i directly change it ? or i hav2 load OFW 1st on my fon n dan only can try another CFW ? rpl soon…thx in advance…and if yes dan is the procedure is same ?
@Vatsal,
You can directly install other CFW. Just to be safe, reset your phone to factory default setting first. Same method (Even Symbian Anna work flawlessly)
my RM-625 has become 220 mb something after copying cfw files into original firmfare did i do all the steps ok
JAF Pooling phone…Phone not found…[5235]
am trying windows xp & windows 7
IT shows
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
Searching for default location of ini…
Checking path: \Products\RM-588\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-588\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Not found!!!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting…………PUBKEYS already sent…
PUBKEYS already sent…
……..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 592, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01…
Erasing cmt zone 02EA0000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F47FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
cmt->PAPUB keys already sent…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
Phone not found…
Second try…
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
MODEL:5235
TYPE:RM-588
FCC id:ljprm-588x
IC:661E-RM588
CODE:059B716
What flash files i should download?
i had tried 21.6.005
JAF Pooling phone…Phone not found…[5235]
am trying windows xp & windows 7
IT show
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
Searching for default location of ini…
Checking path: \Products\RM-588\
Searching for JAF saved location of ini…
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
Scanning ini files…
Searching for default location of ini…
Checking path: \Products\RM-588\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-588\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Not found!!!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting…………PUBKEYS already sent…
PUBKEYS already sent…
……..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 592, APE blocks: 0
Erasing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01…
Erasing cmt zone 02EA0000 – 09D5FFFF … Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx…
Erasing cmt zone 09E60000 – 0F47FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
cmt->PAPUB keys already sent…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_prd.rofs2.V01…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-588\RM-588_21.6.005_001_000_U001.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
Phone not found…
Second try…
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
MODEL:5235
TYPE:RM-588
FCC id:ljprm-588x
IC:661E-RM588
CODE:059B716
What flash files i should download?
i had tried 21.6.005
i have nokia 5233 RM-625 V51.1.002 where to get it`s orignal firmware.i cant find it on NVIFARM …
please help me….+
i flashed symbian anna after few months it bricked and now it wont flash using jaf it ays cant boot phone and Error reading phone init data…… please help… thanks
my que is wen i try to change the extension of the CFW file, it says ” changing the extension will make the file unusable…” for ex my OFW file name is ” RM-356_60.0.003_prd.rofs2.V19 ” and CFW file is ” RM-356_60.0.003_prd.rofs2.V05 “… so should i change V05 to V19 or not to change it ?
-tx in advance…
whts d diff b/w INI Flash method and Manual Flash ?
does it make any diff to the working of the fon ?
bro pls 1help,i dnt knw how to select variant in navifirm:( when i find by phone’s code it shows “germany red(05**)bt i m from india..pls help me how to select variant?
CAN I ABLE TO GET YOUR CONTACT NUMBER….
hey dude plz help me !! How to remove mobitracker from 5800 !
how i,can frash it coz if i,try say err idon’t knw y?
http://www.myiptest.com/staticpages/index.php/http-proxy-checker-tool.html/217.116.23.132:80
I never would have thought I would need to be familiar with this, but thank goodness for google, right?
Hi Nice Tutorial and i want to ask some question,i have 4 file do i have to chance the name of the
cfw file to the name of my ofw file??
*change
hi, very good tutorial. I hope you can understand my English. I’ve read your tutorial and some others. Unfortunately, I’m still having doubts in the following matter. This is my confusion: I’ve got a cwf with 7 files, same number as my original firmware RM-356 downloaded from navifirm. The differences between them is just in 3 of the 7 files. More specifically in a portion of the files name. My files, from navifirm, include a number which is the same of my product code and the cwf files have a different number. My question is what should I do?. Options: a) change the cwf file name, I mean, just the different part of the file name,the number, with my original file name which include my product code or b) should I change my product code to the number included in the cwf file and then use these files to flash? An example: 1) My originals files downloaded with navifirm: ” RM356 0558982 60.0.003 001 signature.bin”–“RM356 0558982 60.0.003 001.vpl”– “RM356 0558982 60.0.003 001.dcp”. 2) cwf files: “RM356 0559051 60.0.003 001.dcp”–“RM356 0559051 60.0.003 001.vpl”—“RM356 0559051 60.0.003 001 signature.bin” Many Thanks
after mastering flashing rom most android phones like SGW/SGN/SG ace…i head back to my store room and found my 5800xm..and started searching for flashing CFW..for 3 full days..and i found your site , nefore that ive downloaded some jaf tool navifirm…now heading to flash this phone..thanx for the complete guide..
TANKS , thankyou very much… 🙂 🙂
Did you say
how can it?
And
Any teach me,
by TeamViewer
I for all time emailed this webpage post page to all my friends, because if
like to read it after that my links will too.
Hey, do this method works on N97 mini??
I currently using version 10.0.020..
how should i flash symbian anna v7.9 para in my nokia x6 .(rm-559)
it is successfully flashed.thanx paul.please tell me how to clear life timer?
Hey there it is not possible to download the files anymore. Can someone please send them to me? shinigami_doujinshi@yahoo.de thanks so much!
it will say ini file not found..